WEBVTT

00:00:03.560 --> 00:00:06.350
To shut down, close the air source valve.

00:00:06.350 --> 00:00:11.998
Then open the bleed valve slowly, keeping your face and hands away from the outlet.

00:00:11.998 --> 00:00:16.352
Wait until the air stops venting and supply pressure reads zero,

00:00:16.352 --> 00:00:18.462
and leave the bleed valve open.

00:00:18.462 --> 00:00:22.680
Now stop and check: watch supply pressure for one full minute.

00:00:22.680 --> 00:00:26.559
It must stay at zero, with no air leaking at any fitting.

00:00:26.559 --> 00:00:31.050
If the reading rises, or you hear air, leave everything connected,

00:00:31.050 --> 00:00:34.430
keep the source closed, and contact ATOR Labs.

00:00:35.480 --> 00:00:40.560
Close the software, switch the Cal-Kit off, and turn the OMNIcheck off.

00:00:41.610 --> 00:00:46.010
Only after that one-minute check, disconnect in this order.

00:00:46.010 --> 00:00:50.261
To release a quick-connect, push the two halves together,

00:00:50.261 --> 00:00:53.617
pull the sleeve back, then pull the hose off.

00:00:53.617 --> 00:00:59.583
First, the supply hose at the adapter, then take the adapter off the air source.

00:00:59.583 --> 00:01:01.000
The elbow at HP in.

00:01:01.000 --> 00:01:06.072
Unscrew the HP hose from the OMNIcheck, then release it from HP out.

00:01:06.072 --> 00:01:07.936
The MP hose at both ends.

00:01:07.936 --> 00:01:13.231
The LP hose set at port D: press the orange ring down, and pull it out.

00:01:13.231 --> 00:01:18.302
Then the USB cables, and last, the 24 V supply: from the wall first.

00:01:18.302 --> 00:01:23.400
If a connection won't release, don't force it: contact ATOR Labs.

00:01:24.450 --> 00:01:29.254
Put every small part back in the pouch, and tick it off the packing list.

00:01:29.254 --> 00:01:32.676
Close the Cal-Kit lid and set it in the bottom foam.

00:01:32.676 --> 00:01:35.901
Coil both blue HP hoses in the channel around it,

00:01:35.901 --> 00:01:39.323
fit the top foam with the pouch, and latch the case.

00:01:39.323 --> 00:01:43.850
Put on the prepaid return label from ATOR Labs, and ship it back.
